dmesg - Flac audio encoding
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-45-generic-pae (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #102-Ubuntu SMP Wed Jan 2 22:10:16 UTC 2013 (Ubuntu 2.6.32-45.102-generic-pae 2.6.32.60+drm33.26)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000d9e55000 (usable)
BIOS-e820: 00000000d9e55000 - 00000000d9f6d000 (reserved)
BIOS-e820: 00000000d9f6d000 - 00000000d9f6f000 (usable)
BIOS-e820: 00000000d9f6f000 - 00000000da6bf000 (reserved)
BIOS-e820: 00000000da6bf000 - 00000000da93f000 (ACPI NVS)
BIOS-e820: 00000000da93f000 - 00000000da944000 (ACPI data)
BIOS-e820: 00000000da944000 - 00000000da987000 (ACPI NVS)
BIOS-e820: 00000000da987000 - 00000000dad91000 (usable)
BIOS-e820: 00000000dad91000 - 00000000daff2000 (reserved)
BIOS-e820: 00000000daff2000 - 00000000db000000 (usable)
BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000011f600000 (usable)
DMI 2.7 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x11f600 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0DB800000 mask FFF800000 uncachable
5 base 11F800000 mask FFF800000 uncachable
6 base 11F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 0000000020000000 (usable)
modified: 0000000020000000 - 0000000020200000 (reserved)
modified: 0000000020200000 - 0000000040000000 (usable)
modified: 0000000040000000 - 0000000040200000 (reserved)
modified: 0000000040200000 - 00000000d9e55000 (usable)
modified: 00000000d9e55000 - 00000000d9f6d000 (reserved)
modified: 00000000d9f6d000 - 00000000d9f6f000 (usable)
modified: 00000000d9f6f000 - 00000000da6bf000 (reserved)
modified: 00000000da6bf000 - 00000000da93f000 (ACPI NVS)
modified: 00000000da93f000 - 00000000da944000 (ACPI data)
modified: 00000000da944000 - 00000000da987000 (ACPI NVS)
modified: 00000000da987000 - 00000000dad91000 (usable)
modified: 00000000dad91000 - 00000000daff2000 (reserved)
modified: 00000000daff2000 - 00000000db000000 (usable)
modified: 00000000db800000 - 00000000dfa00000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fed00000 - 00000000fed04000 (reserved)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000011f600000 (usable)
initial memory mapped : 0 - 00e00000
init_memory_mapping: 0000000000000000-00000000379fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037800000 page 2M
0037800000 - 00379fe000 page 4k
kernel direct mapping tables up to 379fe000 @ 10000-16000
RAMDISK: 178a8000 - 1803f145
ACPI: RSDP 000f0450 00024 (v02 ALASKA)
ACPI: XSDT da926070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP da92fb08 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT da926160 099A5 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS da93df80 00040
ACPI: APIC da92fc00 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG da92fc68 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET da92fca8 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT da92fce0 0054B (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT da930230 008A2 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT da930ad8 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
3708MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
node 0 low ram: 00000000 - 379fe000
node 0 bootmap 00012000 - 00018f40
(9 early reservations) ==> bootmem [0000000000 - 00379fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000941838] TEXT DATA BSS ==> [0000100000 - 0000941838]
#4 [00178a8000 - 001803f145] RAMDISK ==> [00178a8000 - 001803f145]
#5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#6 [0000942000 - 00009491a2] BRK ==> [0000942000 - 00009491a2]
#7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00fcbe0] fcbe0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000379fe
HighMem 0x000379fe -> 0x0011f600
Movable zone start PFN for each node
early_node_map[8] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x00020000
0: 0x00020200 -> 0x00040000
0: 0x00040200 -> 0x000d9e55
0: 0x000d9f6d -> 0x000d9f6f
0: 0x000da987 -> 0x000dad91
0: 0x000daff2 -> 0x000db000
0: 0x00100000 -> 0x0011f600
On node 0 totalpages: 1020925
free_area_init_node: node 0, pgdat c07e0e00, node_mem_map c1001200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3950 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 221482 pages, LIFO batch:31
HighMem zone: 7417 pages used for memmap
HighMem zone: 786296 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c3600000 s39512 r0 d21928 u1048576
pcpu-alloc: s39512 r0 d21928 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1011728
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
allocated 23541440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000379fe:0011f600)
Memory: 4005504k/4708352k available (4856k kernel code, 77072k reserved, 2229k data, 684k init, 3174852k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc07ec000 - 0xc0897000 ( 684 kB)
.data : 0xc05be01f - 0xc07eb788 (2229 kB)
.text : 0xc0100000 - 0xc05be01f (4856 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:424
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2693.859 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.71 BogoMIPS (lpj=10775436)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22480 entries in 44 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) CPU G630 @ 2.70GHz stepping 07
Booting processor 1 APIC 0x2 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6
CPU1: Intel(R) Pentium(R) CPU G630 @ 2.70GHz stepping 07
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (10775.22 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
devtmpfs: initialized
regulator: core version 0.5
Time: 16:23:05 Date: 02/11/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf7800000-0xf7bfffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f]
pci 0000:00:16.0: reg 10 64bit mmio: [0xf7d09000-0xf7d0900f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xf7d07000-0xf7d073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7d00000-0xf7d03fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xf7d06000-0xf7d063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117]
pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103]
pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 20 io port: [0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 24 io port: [0xf0c0-0xf0cf]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7d05000-0xf7d050ff]
pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f]
pci 0000:00:1f.5: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.5: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.5: reg 20 io port: [0xf070-0xf07f]
pci 0000:00:1f.5: reg 24 io port: [0xf060-0xf06f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xf7c00000-0xf7c0ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: PME# supported from D0 D1 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: bridge 32bit mmio: [0xf7c00000-0xf7cfffff]
pci 0000:02:00.0: reg 10 io port: [0xe000-0xe0ff]
pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf0004000-0xf0004fff]
pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf0000000-0xf0003fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0x1000-0x100f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x453 has been reserved
system 00:05: ioport range 0x458-0x47f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:07: ioport range 0x454-0x457 has been reserved
system 00:08: ioport range 0xa00-0xa1f has been reserved
system 00:08: ioport range 0xa30-0xa3f has been reserved
system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
system 00:0f: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0f: iomem range 0xfed10000-0xfed17fff has been reserved
system 00:0f: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:0f: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:0f: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:0f: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0f: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:0f: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0f: iomem range 0xff000000-0xffffffff has been reserved
system 00:0f: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:0f: iomem range 0xdfa00000-0xdfa00fff has been reserved
system 00:10: iomem range 0x20000000-0x201fffff has been reserved
system 00:10: iomem range 0x40000000-0x401fffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xf7c00000-0xf7cfffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4: IO window: 0xe000-0xefff
pci 0000:00:1c.4: MEM window: disabled
pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f00fffff
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xf7c00000-0xf7cfffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf00fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1360599785.000:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 1624
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN0] (off)
fan PNP0C0B:01: registered as cooling_device1
ACPI: Fan [FAN1] (off)
fan PNP0C0B:02: registered as cooling_device2
ACPI: Fan [FAN2] (off)
fan PNP0C0B:03: registered as cooling_device3
ACPI: Fan [FAN3] (off)
fan PNP0C0B:04: registered as cooling_device4
ACPI: Fan [FAN4] (off)
ACPI: SSDT da670018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device5
ACPI: SSDT da671a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT da66fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
processor LNXCPU:01: registered as cooling_device6
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
isapnp: Scanning for PnP cards...
Freeing initrd memory: 7772k freed
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d07000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d06000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 1:321:388
thermal cooling_device3: hash matches
rtc_cmos 00:06: setting system clock to 2013-02-11 16:23:06 UTC (1360599786)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
isapnp: No Plug & Play device found
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
ata1.01: failed to resume link (SControl 0)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN01, max UDMA/100
ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000AZRX-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 <
ata2.00: configured for UDMA/100
sda5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN01 PQ: 0 ANSI: 5
sda6 sda7 > sda2 sda3 sda4
sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 684k freed
Write protecting the kernel text: 4860k
Write protecting the kernel read-only data: 1888k
udev: starting version 151
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: unknown MAC, using family default
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
r8169 0000:02:00.0: irq 26 for MSI/MSI-X
eth0: RTL8101e at 0xf8274000, d4:3d:7e:02:ba:91, XID 00a00000 IRQ 26
EXT4-fs (sda2): mounted filesystem with ordered data mode
udev: starting version 151
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
udev: renamed network interface eth0 to eth1
lp: driver loaded but no devices found
parport_pc 00:0e: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
cfg80211: Calling CRDA to update world regulatory domain
ppdev: user-space parallel port driver
ath9k 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath9k 0000:01:00.0: setting latency timer to 64
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
lp0: using parport0 (interrupt-driven).
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9287 MAC/BB Rev:2 AR5133 RF Rev:ff: mem=0xf8580000, irq=16
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
udev: renamed network interface wlan0 to wlan1
Console: switching to colour frame buffer device 80x30
psmouse serio1: ID: 10 00 64
hda_codec: ALC887: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
type=1505 audit(1360599799.645:2): operation="profile_load" pid=761 name="/sbin/dhclient3"
type=1505 audit(1360599799.645:3): operation="profile_replace" pid=777 name="/sbin/dhclient3"
type=1505 audit(1360599799.645:4): operation="profile_load" pid=761 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1360599799.645:5): operation="profile_load" pid=761 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1360599799.645:6): operation="profile_replace" pid=777 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1360599799.645:7): operation="profile_replace" pid=777 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1360599799.645:8): operation="profile_replace" pid=820 name="/sbin/dhclient3"
type=1505 audit(1360599799.645:9): operation="profile_replace" pid=820 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1360599799.645:10): operation="profile_replace" pid=820 name="/usr/lib/connman/scripts/dhclient-script"
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
EXT4-fs (sda3): mounted filesystem with ordered data mode
EXT4-fs (sda5): mounted filesystem with ordered data mode
type=1505 audit(1360599800.645:11): operation="profile_load" pid=1205 name="/usr/share/gdm/guest-session/Xsession"
ADDRCONF(NETDEV_UP): wlan1: link is not ready
r8169: eth1: link up
r8169: eth1: link up
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x2c0 offMax=0x14c8
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.6 (interface 0x001a0004).
vboxpci: IOMMU not found (not compiled)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
eth1: no IPv6 routers present
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
wlan1: deauthenticating from 00:15:6d:4e:af:20 by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:1d (try 1)
wlan1: direct probe responded
wlan1: authenticate with AP 00:15:6d:4e:af:1d (try 1)
wlan1: authenticate with AP 00:15:6d:4e:af:1d (try 2)
wlan1: authenticated
wlan1: associate with AP 00:15:6d:4e:af:1d (try 1)
wlan1: RX AssocResp from 00:15:6d:4e:af:1d (capab=0x421 status=0 aid=9)
wlan1: associated
ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
wlan1: no IPv6 routers present
usb 2-1.3: new high speed USB device using ehci_hcd and address 3
usb 2-1.3: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 4
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1.3: USB disconnect, address 3
usb 2-1.3: new high speed USB device using ehci_hcd and address 4
usb 2-1.3: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access Kingston DataTraveler G3 1.00 PQ: 0 ANSI: 4
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 15131636 512-byte logical blocks: (7.74 GB/7.21 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI removable disk
usb 2-1.3: USB disconnect, address 4
wlan1: deauthenticating from 00:15:6d:4e:af:1d by local choice (reason=3)
wlan1: deauthenticating from 00:15:6d:4e:af:1d by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:20 (try 1)
wlan1: direct probe responded
wlan1: authenticate with AP 00:15:6d:4e:af:20 (try 1)
wlan1: authenticate with AP 00:15:6d:4e:af:20 (try 2)
wlan1: authenticated
wlan1: associate with AP 00:15:6d:4e:af:20 (try 1)
wlan1: RX AssocResp from 00:15:6d:4e:af:20 (capab=0x421 status=0 aid=1)
wlan1: associated
wlan1: deauthenticating from 00:15:6d:4e:af:20 by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:20 (try 1)
wlan1: deauthenticating from 00:15:6d:4e:af:20 by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:1d (try 1)
wlan1: direct probe responded
wlan1: authenticate with AP 00:15:6d:4e:af:1d (try 1)
wlan1: authenticated
wlan1: associate with AP 00:15:6d:4e:af:1d (try 1)
wlan1: RX AssocResp from 00:15:6d:4e:af:1d (capab=0x421 status=0 aid=9)
wlan1: associated
wlan1: deauthenticating from 00:15:6d:4e:af:1d by local choice (reason=3)
wlan1: deauthenticating from 00:15:6d:4e:af:1d by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:20 (try 1)
wlan1: direct probe responded
wlan1: authenticate with AP 00:15:6d:4e:af:20 (try 1)
wlan1: authenticated
wlan1: associate with AP 00:15:6d:4e:af:20 (try 1)
wlan1: RX AssocResp from 00:15:6d:4e:af:20 (capab=0x421 status=0 aid=1)
wlan1: associated
wlan1: deauthenticating from 00:15:6d:4e:af:20 by local choice (reason=3)
wlan1: deauthenticating from 00:15:6d:4e:af:20 by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:1d (try 1)
wlan1: direct probe to AP 00:15:6d:4e:af:1d (try 2)
wlan1: direct probe responded
wlan1: authenticate with AP 00:15:6d:4e:af:1d (try 1)
wlan1: authenticated
wlan1: associate with AP 00:15:6d:4e:af:1d (try 1)
wlan1: RX AssocResp from 00:15:6d:4e:af:1d (capab=0x421 status=0 aid=9)
wlan1: associated
wlan1: deauthenticating from 00:15:6d:4e:af:1d by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:1d (try 1)
wlan1: deauthenticating from 00:15:6d:4e:af:1d by local choice (reason=3)
wlan1: direct probe to AP 00:15:6d:4e:af:20 (try 1)
wlan1: direct probe to AP 00:15:6d:4e:af:20 (try 2)
wlan1: direct probe responded
wlan1: authenticate with AP 00:15:6d:4e:af:20 (try 1)
wlan1: authenticated
wlan1: associate with AP 00:15:6d:4e:af:20 (try 1)
wlan1: RX AssocResp from 00:15:6d:4e:af:20 (capab=0x421 status=0 aid=4)
wlan1: associated